Seiko Group OC CS 6060 IP-6600 - Manual (Page 45)

2-1
Section 2 Basic Operations
Connecting with Computer
System configuration (connection example)
Connection procedure
Turning the Power On/Off
Turning the Power On
Turning the Power Off
Replacing the Paper Roll
Installing Paper Roll in the Printer
Removing the Paper Roll from the Printer
Replacing Paper Roll with Another
Replacing Empty Paper Roll
Replacing Jammed Paper Roll
Installing/Removing Cut Sheet in/from the Printer
Replacing Ink Cartridges
Ink Cartridge Replacement Procedure
Replacing Empty Ink Cartridge
If an Ink Cartridge Is Not Installed
If an Ink Cartridge Is Not Detected
Replacing the Waste Ink Bottle
Waste Ink Bottle Replacement Procedure
If the Waste Ink Bottle Is Full
If the Waste Ink Bottle Is Not Installed
Head Cleaning "CLEANING"
Paper Feed "FEED"
Using the Origin Point Setting Function
Installing Paper on Winder
Changing Heater Control Setting Temperature
Using the Media Pressure Alternation Lever
Using the Head Up/Down Lever
Using the Media Edge Guard
Using the FAN Guard Positioning Bar
Using the Print Pause/Restart and Cancel Keys
Inspection & Maintenance
Contents of this section
Section 2 Basic Operations