Sharp AR-5316 - Manual (Page 19)

17
BEFORE USING THE MACHINE
1
4 Press the [START] key ( ) and then
the [PAPER SIZE ENTER] key.
To change the paper size
setting of another tray,
repeat steps 2 to 5 after
pressing the [START]
key (
).
Important points when using the printer mode
• Make sure that the tray's paper size setting is the
same as the tray's paper size setting in the printer
driver. For example, if the tray's paper size setting is
8-1/2" x 11R, set "Setting Paper Size" to "Letter-R".
For more information, see "CONFIGURING THE
PRINTER DRIVER" in the "Software Setup Guide".
Affix the paper size label for the paper size
selected in step 3 to the label position on the
right end of the tray.
START
Note
AR-5316-5320-EX.book 17 ページ ２００５年４月８日 金曜日 午前９時３５分