Sharp AR-5316 - Manual (Page 52)

50
TROUBLESHOOTING
B. Misfeed in the fusing area
1 Push gently on both ends of the front
cover.
2 Turn the roller rotating knob in the
direction of the arrow.
3 Carefully remove the misfed paper.
Lower the fusing unit release levers to
allow easier removal.
Be careful not to tear the
misfed paper during
removal.
4 Lift the fusing unit release levers, to
return them to their operating
positions.
5 Close the front cover and side cover.
The misfeed indicator
(
) will go out.
The fusing unit is hot. Do not touch
the fusing unit when removing misfed
paper. Doing so may cause a burn or
injury.
• Do not touch the drum cartridge (green
portion) when removing the misfed paper.
Doing so may damage the drum and cause
smudges on copies.
• Be careful about unfixed toner on the
misfed paper not to soil your hands or
clothes.
Roller rotating knob
Fusing unit
release lever
Warning
Caution
• When closing the front cover, gently hold
both ends.
• When closing the side cover, press on the
handle.
• If the misfeed indicator ( ) does not stop
blinking, check for torn pieces of paper in
the machine.
Note
AR-5316-5320-EX.book 50 ページ ２００５年４月８日 金曜日 午前９時３５分