Sharp AR-5316 - Manual (Page 57)

55
TROUBLESHOOTING
5
5 Remove the new drum cartridge from
the protective bag and gently insert
the lead end of the drum cartridge
along the guides.
6 Remove the protective cover from the
drum cartridge and then push the
cartridge all the way into the machine.
7 Insert the TD cartridge along the
guides until it locks in place.
If there is any dirt or dust
on the TD cartridge,
remove it before
installing the cartridge.
8 Close the front cover and side cover.
The drum cartridge
replacement required
indicator (
) will go
out.
Do not touch the drum cartridge (green
portion). Doing so may damage the drum and
cause smudges on copies.
• Before closing the front cover, make sure
that the TD cartridge and drum cartridge is
correctly installed.
• When closing the front cover, gently hold
both ends.
Caution
1
2
Note
AR-5316-5320-EX.book 55 ページ ２００５年４月８日 金曜日 午前９時３５分