Selecting auditing mode settings 1 – Sharp AR-5316 User Manual
Page 39
37
USER SETTINGS
4
SELECTING AUDITING MODE SETTINGS
1
Hold down the [Light] key (
) until
the alarm indicators ( ,
,
,
,
)
blink.
The display shows "- -"
with the left hyphen
blinking.
2
Enter the program number with the
numeric keys.
• See "AUDITING MODE
SETTINGS" (p.36) for
the program numbers.
• The selected program
number blinks.
• For example, to select
"Auditing mode", enter
"10".
3
Press the [START] key (
).
• The selected program
number stops blinking
and lights steadily.
• The currently selected
setting code blinks in
the 1st digit of the
display.
4
Enter the desired setting code for the
program as explained in the detailed
procedures on the following pages.
For the setting codes, see "AUDITING MODE
SETTINGS". (p.36)
5
Press the [Light] key (
) to complete
the settings.
The alarm indicators
( ,
,
,
,
)
go
off and the display returns to the number of
copies display.
If you enter the wrong number, press the
[CLEAR] key (
) and then enter the correct
number.
• If you enter the wrong number, press the
[CLEAR] key (
) and return to step 2.
• If "E" (error code) blinks in the first digit of
the display, press the [CLEAR] key (
)
and return to step 2.
1 3 5
RE D END
Note
START
Note
AR-5316-5320-EX.book 37 ページ ２００５年４月８日 金曜日 午前９時３５分