Customizing settings, User programs), User programs – Sharp AR-5316 User Manual

Page 35

Advertising
background image

33

4

CUSTOMIZING SETTINGS

(User programs)

The user programs allow you to customize the machine to match your needs.

USER PROGRAMS

Program

number

Program name

Setting codes

(factory default setting

appears in bold)

Explanation

1

Auto clear time

1: OFF
2: 10 sec.
3: 20 sec.
4: 60 sec.
5: 90 sec.
6: 120 sec.

• "Auto clear time" automatically returns the

copy settings to the initial settings (p.12) when
a certain period of time elapses after a copy is
made. This program is used to select the
period of time. "Auto clear time" can also be
disabled.

2

Preheat mode

1: 1 min.
2: 5 min.
3: 30 min.
4: 60 min.
5: 120 min.
6: 240 min.

• This function automatically switches the

machine to a low power consumption state if
the set duration of time elapses without the
machine being used when the power is on.
The POWER SAVE indicator lights up,
however, the keys on the operation panel can
be used. Normal operation automatically
resumes when a key on the operation panel is
pressed, a print job is received or an original is
placed.

3

Auto power shut-off
timer

1: 5 min.
2: 30 min.
3: 60 min.
4: 120 min.
5: 240 min.

• This function automatically switches the

machine to a state that consumes even less
power than preheat mode if the set duration of
time elapses without the machine being used
when the power is on. All lights except the
POWER SAVE indicator and ON LINE
indicator go off. To resume normal operation,
press the [START] key (

).

Normal operation also resumes automatically
when a print job is received. While in auto
power shut-off mode, no keys (except the
[START] key (

)) can be used.

4

Stream feeding mode

*1

0: OFF
1: ON

• When copying using the SPF, during the

period of time that the SPF indicator blinks
after an original has been scanned
(about 5 seconds), a subsequent original can
be placed and automatically fed into the
machine.

5

Auto power shut-off
setting

0: OFF
1: ON

• Use this setting to enable or disable auto

power shut-off.

10 to 15

Auditing mode

See "AUDITING MODE SETTINGS" (p.36).

*

1

When the SPF is installed.

AR-5316-5320-EX.book 33 ページ 2005年4月8日 金曜日 午前9時35分

Advertising