Peripheral devices and supplies, Peripheral devices, Chapter 7 – Sharp AR-5316 User Manual
Page 62: Single pass feeder
60
7
Chapter 7
PERIPHERAL DEVICES AND SUPPLIES
Optional equipment and supplies are explained in this chapter. To purchase optional equipment and supplies,
contact SHARP service.
PERIPHERAL DEVICES
SINGLE PASS FEEDER
For the names of the parts of the SPF, see "PART NAMES AND FUNCTIONS". (p.8)
Specifications
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product improvement without prior notice. The performance specification figures indicated are nominal
values of production units. There may be some deviations from these values in individual units.
Note
Single pass feeder
(AR-SP6N)
AR-SP6N (Single pass feeder)
Acceptable
original
Weight
15 lbs. to 24 lbs. (56 g/m
2
to 90 g/m
2
)
Size
5-1/2" x 8-1/2" to 11" x 17"
(5-1/2 x 8-1/2" size originals cannot be used in the duplex copy mode.)
Capacity
Up to 40 sheets (Thickness 5/32" (4 mm) and below)
For 8-1/2" x 14" and larger sizes, up to 30 sheets
Detectable original sizes
5-1/2" x 8-1/2", 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17"
Weight
11.1 lbs. (5.0 kg)
Dimensions
22-61/64" (W) x 17-9/64" (D) x 5-1/4" (H)
(583 mm (W) x 435 mm (D) x 133 mm (H))
!Chapter6.fm 60 ページ ２００５年４月８日 金曜日 午後１時２７分