Sharp AR-5316 - Manual (Page 65)

63
APPENDIX
8
* First copy out time is measured with original on the document glass in full ready condition with fuser at operating temperature
and mirror motor at operating speed, actual time may vary based on environment conditions.
Printer Function
* Print speed during printing of the second sheet and following sheets when using 8-1/2" x 11" plain paper and performing
continuous one-sided printing of the same page.
Weight
Approx. 69.1 lbs. (31.3 kg)
(Not including TD cartridge)
Dimensions
23-15/64" (W) x 22-23/32" (D) x 18-33/64" (H)
(590 mm (W) x 577 mm (D) x470 mm (H))
Operating conditions Temperature: 59°F to 86°F (15°C to 30°C), Humidity: 20% to 85%
Noise level
Sound Power Level L wA (1B=10dB)
Copying: 6.2[B]
Standby: 3.1[B]
Sound Pressure Level L
pA (bystander positions)
Copying: 48[dB(A)]
Standby: 16[dB(A)]
Sound Pressure Level L
pA (operator position)
Copying: 50[dB(A)]
Standby: 18[dB(A)]
Noise emission measurement in accordance with ISO 7779.
Emission concentration
(measured according to
RAL-UZ62: Edition Jan.
2002)
Ozone: 0.02 mg/m
3
or less
Dust: 0.075 mg/m 3 or less
Styrene: 0.07 mg/m 3 or less
Print speed* 12 ppm
Resolution 600 dpi
Memory 16 MB
Emulation SHARP GDI
Interface
IEEE1284 parallel connector/
USB connector (USB1.1)
Interface cables
[Parallel cable]
Shielded bi-directional (IEEE1284) cable (max. length 3 m (10 feet))
Please purchase a commercially available parallel cable.
[USB cable (only for connection to USB 1.1 connector)]
Shielded twisted pair cable (max. length 3 m (10 feet))
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product improvement without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviations from these values in individual units.
Note
!Chapter7.fm 63 ページ ２００５年４月１１日 月曜日 午前１１時２２分