Sharp AR-5316 - Manual (Page 27)

25
COPY FUNCTIONS
2
6 Use the [PRESET RATIO] selector
keys (
, ) and [Zoom] keys ( , )
to change the copy ratio in the
horizontal direction.
Press the [PRESET RATIO] selector keys ( ,
) to select a ratio close to the desired ratio, and
then press the [Zoom] keys ( , ) to adjust
the ratio in increments of 1%.
The ratio appears in the display.
7 Press the [Copy ratio display] key
(
).
The selected ratio for the horizontal direction will
be entered and the display will change to the
number of copies display.
8 Set the number of copies and other
copy settings, and then press the
[START] key (
).
The copy will be delivered to the paper output
tray.
• To verify the copy ratios, press and hold
down the [Copy ratio display] key ( ).
The vertical and horizontal ratios will be
alternately displayed.
• If you need to change the ratios, press the
[PRESET RATIO] selector keys ( , )
and the [Zoom] keys ( , ) to reset the
ratios, beginning with the vertical ratio.
(step 4)
• To cancel XY ZOOM copy, press the
[XY-ZOOM] key. The XY-ZOOM indicator
will go off, indicating that the function is
canceled.
Note
!Chapter2.fm 25 ページ ２００５年４月８日 金曜日 午後３時３８分