Samsung S3C2440A - Manual (Page 132)

S3C2440A RISC MICROPROCESSOR THUMB INSTRUCTION SET
4-11
FORMAT 4: ALU OPERATIONS
15 0
0
14 10
[2:0] Source/Destination Register
[5:3] Source Register 2
[9:6] Opcode
5 6 3
Rd 0 0
13 12 11
Op Rs 0 0 0
9 2
Figure 4-5. Format 4
OPERATION
The following instructions perform ALU operations on a Lo register pair.
NOTE
All instructions in this group set the CPSR condition codes.
Table 4-5. Summary of Format 4 Instructions
OP THUMB Assembler ARM Equipment Description
0000 AND Rd, Rs ANDS Rd, Rd, Rs Rd:= Rd AND Rs
0001 EOR Rd, Rs EORS Rd, Rd, Rs Rd:= Rd EOR Rs
0010 LSL Rd, Rs MOVS Rd, Rd, LSL Rs Rd := Rd << Rs
0011 LSR Rd, Rs MOVS Rd, Rd, LSR Rs Rd := Rd >> Rs
0100 ASR Rd, Rs MOVS Rd, Rd, ASR Rs Rd := Rd ASR Rs
0101 ADC Rd, Rs ADCS Rd, Rd, Rs Rd := Rd + Rs + C-bit
0110 SBC Rd, Rs SBCS Rd, Rd, Rs Rd := Rd - Rs - NOT C-bit
0111 ROR Rd, Rs MOVS Rd, Rd, ROR Rs Rd := Rd ROR Rs
1000 TST Rd, Rs TST Rd, Rs Set condition codes on Rd AND Rs
1001 NEG Rd, Rs RSBS Rd, Rs, #0 Rd = - Rs
1010 CMP Rd, Rs CMP Rd, Rs Set condition codes on Rd - Rs
1011 CMN Rd, Rs CMN Rd, Rs Set condition codes on Rd + Rs
1100 ORR Rd, Rs ORRS Rd, Rd, Rs Rd := Rd OR Rs
1101 MUL Rd, Rs MULS Rd, Rs, Rd Rd := Rs * Rd
1110 BIC Rd, Rs BICS Rd, Rd, Rs Rd := Rd AND NOT Rs
1111 MVN Rd, Rs MVNS Rd, Rs Rd := NOT Rs