Verifying the cluster nodes – Symantec Veritas 5 User Manual
Page 118
To verify the cluster
1
To verify the status of the cluster, type the following command:
hastatus -summary
The output resembles:
-- SYSTEM STATE
-- System
State
Frozen
A
galaxy
RUNNING
0
A
nebula
RUNNING
0
-- GROUP STATE
-- Group
System
Probed
AutoDisabled
State
B
ClusterService
galaxy
Y
N
ONLINE
B
ClusterService
nebula
Y
N
OFFLINE
2
Review the command output for the following information:
■
The system state
If the value of the system state is RUNNING, the cluster is successfully
started.
■
The ClusterService group state
In the sample output, the group state lists the ClusterService group, which
is ONLINE on galaxy and OFFLINE on nebula.
Verifying the cluster nodes
Verify the information of the cluster systems using the
hasys -display
command.
The information for each node in the output should be similar.
Refer to the
hasys(1M)
manual page.
Refer to the Veritas Cluster Server User's Guide for information about the system
attributes for VCS.
To verify the cluster nodes
◆
On one of the nodes, type the
hasys -display
command:
hasys -display
Verifying the VCS installation
Verifying LLT, GAB, and cluster operation
118