Starting the software configuration – Symantec Veritas 5 User Manual
Page 66
To install VCS packages now and configure VCS later
1
If you do not want to configure VCS now, enter n at the prompt.
Are you ready to configure VCS? [y,n,q] (y)
n
The utility checks for the required file system space and makes sure that any
processes that are running do not conflict with the installation. If
requirements for installation are not met, the utility stops and indicates the
actions required to proceed with the process.
2
Review the output as the installer uninstalls any previous versions and installs
the VCS 5.0 RU3 packages.
3
Configure the cluster later.
See
“Configuring VCS using configure option”
on page 59.
Starting the software configuration
You can configure VCS using the Veritas product installer or the installvcs
program.
To configure VCS using the product installer
1
Confirm that you are logged in as the superuser and mounted the product
disc.
2
Start the installer.
#
./installer
The installer starts the product installation program with a copyright message
and specifies the directory where the logs are created.
3
From the opening Selection Menu, choose:
C
for "Configure an Installed
Product."
4
From the displayed list of products to configure, choose: Veritas Cluster
Server.
Installing and configuring VCS
Installing and configuring VCS 5.0 RU3
66