Symantec Veritas 5 - Manual (Page 84)

Verifying the cluster after installation
When you have used installvcs program and chosen to configure and start VCS,
VCS and all components are properly configured and can start correctly. You must
verify that your cluster operates properly after the installation.
See “About verifying the VCS installation” on page 105.
Verifying and updating licenses on the system
After you install VCS, you can verify the licensing information using the vxlicrep
program. You can replace the demo licenses with a permanent license.
Checking licensing information on the system
You can use the vxlicrep program to display information about the licenses on a
system.
To check licensing information
1 Navigate to the folder containing the vxlicrep program and enter:
# cd /opt/VRTS/bin
# ./vxlicrep
2 Review the following output to determine the following information:
■ The license key
■ The type of license
■ The product for which it applies
■ Its expiration date, if any. Demo keys have expiration dates. Permanent
keys and site keys do not have expiration dates.
License Key = xxx-xxx-xxx-xxx-xxx
Product Name = Veritas Cluster Server
Serial Number = 1249
License Type = PERMANENT
OEM ID = 478
Features :=
Platform = Linux for IBM Power
Version = 5.0
Tier = 0
Installing and configuring VCS
Verifying and updating licenses on the system 84