Symantec Veritas 5 - Manual (Page 65)

To install VCS RPMs
1 Review the output as the installer checks the RPMs that are already installed.
2 Choose the VCS RPMs that you want to install.
Select the RPMs to be installed on all systems? [1-3,q,?]
(3) 2
Based on what RPMs you want to install, enter one of the following:
Installs only the required VCS RPMs. 1
Installs all the VCS RPMs.
You must choose this option to configure any optional VCS feature.
Note that this option is the default if you already installed the SF HA RPMs.
2
Installs all the VCS and the SF HA RPMs. (default option)
If you already installed the SF HA RPMs, the installer does not list this option.
3
3 View the list of RPMs that the installer would install on each node.
If the current version of a RPM is on a system, the installer removes it from
the RPM installation list for the system.
Choosing to install VCS RPMs or configure VCS
While you must configure VCS before you can use VCS, you can do one of the
following:
■ Choose to install and configure VCS now.
See “Configuring the basic cluster” on page 67.
■ Install packages on the systems and leave the cluster configuration steps for
later.
65 Installing and configuring VCS
Installing and configuring VCS 5.0 RU3