Symantec Veritas 5 - Manual (Page 63)

To specify system names for installation
1 Enter the names of the systems where you want to install VCS.
Enter the system names separated by spaces on which to install
VCS: galaxy nebula
For a single node installation, enter one name for the system.
See “Creating a single-node cluster using the installer program” on page 139.
2 Review the output as the installer verifies the systems you specify.
The installer does the following:
■ Checks that the local node running the installer can communicate with
remote nodes
If the installer finds ssh binaries, it confirms that ssh can operate without
requests for passwords or passphrases.
■ Makes sure the systems use the proper operating system
■ Checks whether VCS is installed
Licensing VCS
The installer checks whether VCS license keys are currently in place on each
system. If license keys are not installed, the installer prompts you for the license
keys.
See “Checking licensing information on the system” on page 84.
To license VCS
1 Review the output as the utility checks system licensing and installs the
licensing RPM.
2 Enter the license key for Veritas Cluster Server as the installer prompts for
each node.
Enter a VCS license key for galaxy: [?] XXXX-XXXX-XXXX-XXXX-XXX
XXXX-XXXX-XXXX-XXXX-XXX successfully registered on galaxy
VCS license registered on galaxy
63 Installing and configuring VCS
Installing and configuring VCS 5.0 RU3