Sierra Monitor Corporation HRG015-W - Manual (Page 10)

HRX-OM-J049-A
Chapter 1 Safety Instructions
1.3 Hazard Warning Label HRG010-W HRG015-W
1st edition : Aug. 2006
Rev. A: May. 2007
1-4
1.3 Hazard Warning Label
The hazard warning labels indicate where potential hazards are present during unit operation
and maintenance.
The hazard warning labels are in appropriate sizes and colors. They contain symbols in
addition to the descriptions of warnings.
1.3.1 Classification of risks
„ High voltage hazards
The unit is operated at high voltage and may cause an electrical shock. The
attached label contains the symbol .
„ High temperature hazards
The unit reaches high temperature during operation and may cause burns when
an operator comes in contact. The attached label contains the symbol .
„ Rotating object hazards
The unit includes several parts that rotate during operation and may cause the
operator to get the finger caught in these parts. The attached label contains the
symbol .
Only operate the unit with the cover panel attached.
The unit contains the power supply carrying high voltage inside that is
isolated with the cover panel.
There is the presence of the surface in the unit that is at high
temperatures during operation. Potential burns may occur if touched.
Residual heat may cause burns despite the power being turned OFF.
Be sure of the surface reaching room temperature before work.
Only trained personnel are allowed to work, including unit inspection,
around the power supply.
The unit contains a section which rotates when it is in action. Potential
personal injury may occur if touched. A rotator is structured to come
to a temporary stop and resume rotation.
Avoid performing work during system operation.