Sierra Monitor Corporation HRG015-W - Manual (Page 61)

HRX-OM-J049-A
Chapter 7 Documents
HRG010-W HRG015-W 7.2 Optional Specifications
1st edition : Aug. 2006
Rev. A: May. 2007
7-3
7.2 Optional Specifications
„ Caster
Table 7-2 Caster with Brake
Specifications
Item
For HRG010-W-A, HRG015-W-A
Wheel diameter 63mm
Turning radius of the caster 59mm (single)
Adjuster height adjustable
range
0 to 12.5mm
Materials
Caster: SPCC,
Wheel: Nylon
(Base with casters: SUS304)
Allowable load 520kg (130kg per caster, 4 pcs.)
„ GFCI breaker
Table 7-3 GFCI Breaker
Specifications
Item
For HRG010-W-B For HRG015-W-B
Pole 3
Rated sensed current 30mA
Rated interrupting current 40A 60A
Operating time in the event of a
ground fault
0.04s (rated sensed ground-fault current)
Display type Mechanical button
„ Communication
Table 7-4 RS485 Communication
Specifications
Item
For HRG010-W-C, HRG015-W-C
Spec. Adhering to EIA specification and RS-485
BCC check function Enabled (default)
Data length 8 bits (default)
Parity check function Disabled (default)
Stop bit length 2 bits (default)
Baud rate 9600bps (default)
Communication address 1 station (default)
Delay transmission 0msec (default)
Communication mode Writing and reading enabled (default)
Connector number 37, 38
Connector type M4 terminal block