Sierra Monitor Corporation HRG015-W - Manual (Page 40)

HRX-OM-J049-A
Chapter 4 Startup and Shutdown
4.2 Preparation for startup HRG010-W HRG015-W
1st edition : Aug. 2006
Rev. A: May. 2007
4-2
4.2 Preparation for startup
4.2.1 Power supply
1.
Supply the power.
The following conditions are observed on the control panel upon power-ON.
z After 4-sec display of the initial screen on the digital displays PV and SV, temperature and set temperature
of the circulating fluid will be displayed..
z The [POWER] lamp comes on in 6 sec.
Fig. 4-1 Power Supply
4.2.2 Setting of circulating fluid temperature
1.
Press the [UP] and [DOWN] keys to set a desired temperature in the digital display SV.
Fig. 4-2 Setting of Circulating Fluid Temperature
z Note: Circulating fluid setting temp.range is 5 to 35°C.
[POWER]LED
Digital display SV (set temp.)
Digital display PV (circulating fluid temp.)
[DOWN]key [UP] key
Digital display SV (set temp.)