Sony XDCAM HD PDW-HD1500 - Manual (Page 100)

100
Setup Menu
Chapt
er
7
Men
u
s
Items in the basic menu
The basic menu items (excluding the items related to the
digital hours meter) are listed in the following table.
• Item names are the names which appear on the video
monitor screen of this unit and an external monitor,
when the input signals to the monitor are the video
signals output from the COMPOSITE OUTPUT 2
(SUPER) connector, the SDSDI OUTPUT 2 (SUPER)
connector, or the HDSDI OUTPUT 2 (SUPER)
connector.
• An abbreviated name appears in the time data display
area when you press the NEXT button.
• The values in the Settings column are the values which
appear in the time data display area. (The values may
appear in a different format on an external monitor. In
this case, the external monitor values are shown in
parentheses.) Underlined values are the factory defaults.
Item group Function Refer to
Items
100 to 199 Settings relating to control
panels page 107
Items
200 to 299 Settings relating to the remote
control interface page 108
Items
300 to 399 Settings relating to editing
operations page 109
Items
400 to 499 Settings relating to preroll page 109
Items
500 to 599 Settings relating to disc
protection page 109
Items
600 to 650 Settings relating to the
timecode generator page 110
Items
651 to 699 Settings relating to the
metadata and UMID page 110
Items
700 to 799 Settings relating to video
control page 112
Items
800 to 899 Settings relating to audio
control page 115
Items
900 to 999 Settings relating to digital
processing page 116
Item group Function Refer to
Item number Item name Settings
001 PREROLL TIME 0 s (0 sec)... 5 s (5 sec)... 30 s (30 sec): Set the preroll time to between 0
and 30 seconds in steps of 1 second.
A preroll time of at least 5 seconds is recommended when using this
unit for editing.
002 CHARACTER H-POSITION Adjust the horizontal screen position (as a hexadecimal value) of the text
information output from the COMPOSITE OUTPUT 2 (SUPER) connector,
the SDSDI OUTPUT 2 (SUPER) connector, or the HDSDI OUTPUT 2
(SUPER) connector for superimposed display on the monitor.
00... 0C ...28: The hexadecimal value 00 is for the far left of the screen.
Increasing the value moves the position of the characters to the right.
Set this item by adjusting to the required position while viewing the monitor.
003 CHARACTER V-POSITION Adjust the vertical screen position (as a hexadecimal value) of the text
information output from the COMPOSITE OUTPUT 2 (SUPER) connector,
the SDSDI OUTPUT 2 (SUPER) connector, or the HDSDI OUTPUT 2
(SUPER) connector for superimposed display on the monitor.
00... 2A ...32: The hexadecimal value 00 is for the top of the screen.
Increasing the value lowers the position of the characters.
Set this item by adjusting to the required position while viewing the monitor.