Sony XDCAM HD PDW-HD1500 - Manual (Page 118)

118
Setup Menu
Chapt
er
7
Men
u
s
a) When the separately sold PDBK-S1500 option is installed.
Extended menu operations
The extended menu can be used with the same procedures
as in the basic menu.
959
H/V RATIO (UC) a) Adjust the up-converter image enhancer. Set the horizontal/vertical ratio
for edge enhancement.
0 to 3 to 7
965 INPUT UP CONVERT IMAGE
ENHANCER Set up the operation of the up converter image enhancer for SD input,
separately from the settings for playback (menu items 950 to 959).
Sub-Item
1
ENHANCER SETTING
a) PB: While SD signals are input, make the behavior of the image
enhancer of the up-converter follow the settings for playback (menu
items 950 to 959) (Settings for sub-items 2 to 11 under menu item
965 become invalid).
INPUT: While SD signals are input, make the behavior of the image
enhancer of the up-converter follow the settings for sub-items 2 to 11
under menu item 965 (separate settings during input of SD signals
from those during playback).
2 UP CONVERTER MODE Select the up-converter mode.
crop: Select the edge-crop mode.
l-box: Select the letter box mode.
squez: Select the squeeze mode.
3 H CROP POSITION (IN UC) When sub-item UP CONVERTER MODE of menu item 965 is set to
“crop”, adjust the H-crop (horizontal crop) position for up converter output
in edge crop mode.
–120 to 0 to 120
4 LETTER BOX POSITION (IN
UC) When sub-item UP CONVERTER MODE of menu item 965 is set to “l-
box”, adjust the vertical location of the position where the picture is cut
out for up converter output in letter box mode.
–120 to 0 to 120
5 UP CONVERTER PROCESS Select the source picture to use in converting SD to HD.
field: Use field pictures.
adapt: Frame or field is selected automatically.
6 DETAIL GAIN (IN UC) Adjust the up-converter image enhancer. Set the sharpness of edge
enhancement.
0 to 40H to 7FH
7 LIMITER (IN UC) Adjust the up-converter image enhancer. Set the maximum detail level
added to emphasize the original signal.
0 to 20H to 3FH
8 CRISP THRESHOLD (IN UC) Adjust the up-converter image enhancer. Set the threshold amplitude at
which low amplitude signals are not emphasized.
0 to 8 to FH
9 LEVEL DEPEND
THRESHOLD (IN UC) Adjust the up-converter image enhancer. Set the luminance range for
edge enhancement.
0 to 8 to FH
10 H DETAIL FREQUENCY (IN
UC) Adjust the up converter image enhancer. Set the center frequency and
frequency properties for edge enhancement.
3.2MHz: 3.2 MHz ±1.1 MHz
4.5MHz: 4.5 MHz ±1.4 MHz
5.0MHz: 5.0 MHz ±0.7 MHz
4.0MHz: 4.0 MHz ±2.0 MHz
11 H/V RATIO (IN UC) Adjust the up-converter image enhancer. Set the horizontal/vertical ratio
for edge enhancement.
0 to 3 to 7
Menu items in the 900s, relating to digital process
Item number Item name Settings