Sony XDCAM HD PDW-HD1500 - Manual (Page 134)

134
Troubleshooting
App
end
ix
TC EXT!
b) TC EXTERNAL IS SELECTED.
SET TC INTERNAL MODE IN FUNCTION
MENU. This appears when TCG on page P5 TC of the
function menu is set to “EXT”, and you try to preset
timecode or user bits by setting PRST/RGN to
“PRESET”.
Set TCG to “INT” (see page 45).
REGEN mode!
a) TCG REGEN MODE IS SELECTED.
SET TC PRESET MODE IN FUNCTION
MENU. This appears when PRST/RGN on page P5 TC of the
function menu is set to “TC” or “VITC”, and you try to
preset timecode or user bits.
Set PRST/RGN to “PRESET” (see page 45).
REC RUN! a) TCG RUN MODE IS SET TO REC RUN.
SET TC FREE RUN MODE IN FUNCTION
MENU. This appears when RUN MODE on page P5 TC of
the function menu is set to “REC RUN”, and you try to
preset timecode or user bits.
Set RUN MODE to “FREE RUN” (see page 45).
REC mode!
b) THUMBNAIL(S) CANNOT BE
DISPLAYED DURING RECORDING. Stop recording and try again.
CANNOT EXECUTE IN REC MODE.
DRIVE MAINTENANCE MENU CANNOT
BE EXECUTED WHILE IN REC MODE.
INPUT SELECTION CANNOT BE
CHANGED DURING RECORDING.
AUDIO REC MODE CANNOT BE
CHANGED DURING RECORDING.
REC-PAUSE! TC/UB CANNOT BE PRESET IN REC-
PAUSE MODE. Stop recording and try again.
Disc Exchg! EXIT DISC EXCHANGE CACHE MODE. This appears when you perform one of the following
operations.
• Attempt to preset timecode or user bits.
• Attempt to make a FAM connection.
• Press the button such as PLAY button while the
disc is being ejected during disc exchange.
No SEL List
b) CLIP LIST IS NOT SELECTED. This appears when you press the SUB CLIP/
DISC MENU button while the clip list on the disc is
not loaded into the current clip list.
Load the clip list (see page 73) and try again.
SB CLP mode b) TO ADD AN ESSENCE MARK, EXIT
FROM SUB CLIP MODE FIRST. This appears when an attempt is made to manipulate
the essence mark while the SUB CLIP/DISC MENU
indicator is lit or to set a clip flag while the clip list is
being played back (SUB CLIP indicator is lit). Perform
the operation after pressing the SUB CLIP/DISC
MENU button to turn it off.
SUB CLIP NG
b) SUB CLIP IS INVALID.
SET APPROPRIATE IN/OUT POINTS. Set the In and Out points again.
No List! b) NO CLIP LIST. This appears when you try to delete a clip list when
there is no clip list saved on the disc.
Load the disc that contains the clip list you want to
delete.
Loading List! LOADING CLIP LIST. This appears if the SUB CLIP/DISC MENU button is
pressed while a clip list is loading.Wait for the clip list
to finish loading and try again.
STOP ONCE!
b) STOP ONCE, THEN EXECUTE. This appears when the SUB CLIP/DISC MENU
button is pressed while the clip list is being played
back or when an attempt is made to open the GUI
screen with setup menu item 151 GUI OPERATION
set to “stop”. Perform the operation after stopping
playback.
Alarm message in time
data display area Alarm message in video monitor screen Description/action