Sony XDCAM HD PDW-HD1500 - Manual (Page 108)

108
Setup Menu
Chapt
er
7
Men
u
s
a) The disc is ejected after recording stops. b) The unit enters stop mode when the PLAY button is pressed. It enters
freeze picture mode (jog, shuttle, or variable mode) when the SHTL/JOG
button or VAR/JOG button is pressed.
131 AUDIO VOLUME Select whether each of the CH-1/ALL CH, CH-2 to CH-4 adjustment
knobs on the control panel is effective to control the audio recording level
and playback level on each channel or the CH-1/ALL CH adjustment
knob alone functions as a master control to control the audio level on all
channels together.
each: Each of the CH-1/ALL CH, CH-2 to CH-4 adjustment knobs is
effective to control each channel.
all: The CH-1/ALL CH adjustment knob alone functions as a master
control.
When “all” is selected, the ALL CH indicator under the CH-1/ALL CH
adjustment knob lights up.
140 AREA MARKER Select whether to display the display area of SD output on the color LCD.
off: Do not display.
on: Display.
142 REPEAT MODE Put the unit into repeat playback mode, or exit from repeat playback
mode.
off: Exits from repeat playback mode.
play: Puts the unit into repeat playback mode.
143 INDEX PICTURE POSITION Select the frame of the clip to use as the thumbnail image (index picture)
when recording.
0sec to 10sec: Can be set in the range from 0 seconds (first frame of the
clip) to10 seconds, in units of 1 second.
145 MODE KEY ENABLE DURING
RECORDING Select whether the STOP button is the only button that stops recording.
ena (all enable): Recording stops when the EJECT button
a)
, PLAY
button, STOP button, SHTL/JOG button, and VAR/JOG button b) are
pressed.
stop: Recording stops only when the STOP button is pressed.
150 DISC EXCHANGE CACHING Select whether to enable cache recording during disc exchanges (disc
exchange cache function).
off: Do not enable.
on: Enable.
151 GUI OPERATION Select whether to disable the display of the Thumbnail Menu and Disc
Menu when this unit is in any mode other than stop mode.
ena(enable): Do not disable.
stop(via stop): Enable the display of menus in the stop mode.
dis(disable): Disable.
Menu items in the 100s, relating to the control panels
Item number Item name Settings
Menu items in the 200s, relating to the remote control interface
Item number Item name Settings
201 PARA RUN Select whether to use synchronized operation for two or more VTRs.
dis (disable): No synchronized operationena
ena (enable): Use synchronized operation
Note
To use synchronized operation for two or more VTRs, set item 201 to ena
on all of the VTRs.
212 VIDEO REMOTE CONTROL
SELECT
a)
Select whether to control the up converter or down converter when
controlling the image enhancer from the HKDV-900 or another unit
connected to the VIDEO CONTROL connector.
down: Control the down-converter.
up: Control the up-converter.
u&d: Control both the up- and down-converter.
Note
It is also possible to adjust setup menu item 718 SETUP LEVEL/BLACK
LEVEL from the HKDV-900. Hold down the D2 button on the HKDV-900
and rotate the SETUP dial.