Sony XDCAM HD PDW-HD1500 - Manual (Page 75)

75
Scene Selection (Clip List Editing)
Chap
ter
5
Op
er
at
ions
in GUI
S
c
reen
s
the location where the currently selected sub clips will
be inserted.
To display the total duration after addition of the
selected clips
Press the SHIFT button.
5
In the Scene Selection window, move the I cursor to
the location where you want to insert the clip. (The
existing thumbnails arrange themselves to the left and
right of the I cursor.)
6
Press the PUSH SET(S.SEL) knob.
The sub clips are added at the I cursor position, and
you return to the clip list thumbnail screen.
You can check the results of the addition in that screen.
7
Repeat steps 1 to 6 as required to add more clips.
8
Save the clip list (see page 77).
In step 1, you can also perform a shortcut operation by
pressing the PUSH SET(S.SEL) knob with the SHIFT
button held down.
To add clips from the clip playback screen (quick
insertion)
This method allows you to decide the range to use and add
that range as a sub clip while viewing the video in the clip
playback screen. It does not use GUI screens. You can do
this during recording, playback (including pauses), and
searches.
1
Find the point that you want to make the start point of
the sub clip, and then press the PUSH SET(S.SEL)
knob with the
B/IN button held down.
An In point is set and the IN indicator lights.
2
Find the point that you want to make the end point of
the sub clip, and then press the PUSH SET(S.SEL)
knob with the
b/OUT button held down.
An Out point is set and the OUT indicator lights. (This
determines the range of the sub clip to be added.)
To check the timecode of the In point or Out point
Press the
B/IN button or the b/OUT button.
To cue up the In point or Out point
Press the PREV button or the NEXT button with the
B/IN button or b/OUT button held down.
To check the duration (time from In point to Out
point)
Press the
B/IN and b/OUT buttons at the same time.
To delete the In point or Out point
Press the RESET/RETURN button with the
B/IN or
b/OUT button held down.
3
With the SHIFT button held down, press the PUSH
SET(S.SEL) knob.
A sub clip with the range specified in steps 1 and 2 is
added to the end of the clip list.
When you specify a range that spans several clips
Sub clips are generated for each of the clips in the
range.
To check the newly added sub clips
You can check the newly added sub clips by
displaying the clip list thumbnail screen.
4
Repeat steps 1 to 3 as required to add more sub clips.
5
Save the clip list (see page 77).
To reorder sub clips
See page 63 for more information about thumbnail screen
operations.
1
In the clip list thumbnail screen, select the thumbnails
of the sub clips that you want to move (multiple
selections possible).
2
Display the Thumbnail Menu.
3
Select Move Sub Clips, and then press the PUSH
SET(S.SEL) knob.
The Clip List (Move) screen appears.
4
Move the I cursor to the point where you want to move
the selected thumbnails.
5
Press the PUSH SET(S.SEL) knob.
The sub clips are moved to the I cursor position.
6
Repeat steps 1 to 5 as required.
Clip List (Move) 001/034
TC 00:00:00:00
TC 00:04:35:12
TC 00:06:03:03
DATE&TIME 08 AUG 2007 11:50 TOTAL DUR 00:13:48:24
TC 00:00:21:27
TC 00:04:57:10
TC 00:06:25:00
TC 00:04:06:00
TC 00:05:19:08
TC 00:06:46:27
TC 00:04:13:14
TC 00:05:41:05
TC 00:07:08:25
006