Sony XDCAM HD PDW-HD1500 - Manual (Page 74)

74
Scene Selection (Clip List Editing)
Chapt
er 5 Ope
rati
ons
in GUI
S
c
reens
To add sub clips
You can add sub clips to clip lists from with the clip
thumbnail screen or the clip list thumbnail screen.
However, you must use the clip list thumbnail screen to
edit clip lists.
Adding sub clips from the clip thumbnail screen
The following procedure explains operations in the clip
thumbnail screen. You can proceed in the same way in the
expand thumbnail screen and the chapter thumbnail
screen. Expanded blocks are added as sub clips in the
expand thumbnail screen, and chapters are added as sub
clips in the chapter thumbnail screen.
See page 63 for more information about thumbnail screen
operations.
1
In the clip thumbnail screen, select the clip that you
want to add as a sub clip (multiple selections possible).
2
Display the Thumbnail Menu.
3
Select Add Sub Clips, and then press the PUSH
SET(S.SEL) knob.
The Add Sub Clip screen appears.
The clip(s) selected in step 1 appear in the upper part
of this screen, and the clip list appears in the lower
Scene Selection window. The I cursor in the Scene
Selection window indicates the location where the
currently selected sub clip(s) will be inserted.
To display the total duration after addition of the
selected clip
Press the SHIFT button.
4
In the Scene Selection window, move the I cursor to
the location where you want to insert the clip. (The
existing thumbnails arrange themselves to the left and
right of the I cursor.)
5
Press the PUSH SET(S.SEL) knob.
The selected clip is inserted as a sub clip and a “+”
mark appears on the thumbnail in the Scene Selection
window.
To check the addition results
Move the cursor.
6
Press the RESET/RETURN button.
This returns you to the Clip thumbnail screen.
7
Repeat steps 1 to 6 as required to add more clips.
8
Save the clip list (see page 77).
In step 1, you can hold down the SHIFT button when you
press the PUSH SET(S.SEL) knob. This is a shortcut that
displays the Add Sub Clip screen immediately. You can
also save the clip list immediately in step 5 by executing
the Save Clip List command in the Disc Menu.
Adding sub clips from the clip list thumbnail
screen
See page 63 for more information about thumbnail screen
operations.
1
Display the Thumbnail Menu.
2
Select Add Sub Clips, and then press the PUSH
SET(S.SEL) knob.
The Clip List (Add) screen appears.
3
Select the sub clips that you want to add from the
upper part of the screen (the part where 8 thumbnails
are displayed, multiple selections possible).
To select from expanded thumbnails
Press the EXPAND button to display the expand
thumbnail screen.
To select from chapter thumbnails
Press the CHAPTER button to display the chapter
thumbnail screen.
4
Press the PUSH SET(S.SEL) knob.
The thumbnail selection is confirmed, and an I cursor
appears at the bottom of the Clip List (Add) screen (in
the Scene Selection window). The I cursor indicates
TOTAL 00:13:48:24
Add Sub Clip 017/035 002
Scene Selection
TC 00:30:25:11
TC 00:24:24:29
TC 00:30:40:13
TC 00:24:34:27
TC 01:01:28:25
TC 00:24:46:22
TC 00:09:43:14
TC 00:24:56:24
TOTAL 00:13:48:24
Clip List (Add) 017/035 002
Scene Selection
TC 00:30:25:11
TC 00:24:24:29
TC 00:30:40:13
TC 00:24:34:27
TC 01:01:28:25
TC 00:24:46:22
TC 00:09:43:14
TC 00:24:56:24