Sony XDCAM HD PDW-HD1500 User Manual
Page 121
121
Maintenance Menu
Chap
te
r 7
Men
u
s
M38: F-KEY
CONFIG
For details, refer to the Maintenance Manual.
M380: HOME2
Assign a function menu item to page HOME2 of the function menu as a user
setting.
M381: PAGE8 ASSIGN
Assign a setup menu item to page P8 of the function menu as a user setting.
M382: PAGE8 NAME
Specify the name of a setup menu item assigned with M381: PAGE8 ASSIGN.
M38F: NV-RAM
CONTROL
Save the settings of M380 to M382.
M3B: VANC RX
PARAMETER
M3B0: VANC RX
PACKET
For setting HDSDI VANC data input parameters
Notes
• In 59.94i, 50i, 29.97P or 25P mode, selecting the line also selects the
corresponding line in the second field (for example, if line 9 is selected, line 527
is also selected for VANC packet reception).
• Menu item M3B0 enables recording of one VANC packet when the selected line
contains any packets whose DID/SDID matches the value set with this menu
item.
• Up to four packets are recorded per each line regardless of the DID and SDID
for the VANC set with menu item M3B1 or M3B2.Menu items M3B1 and MSB2
enable recording of up to four VANC packets in the selected line, respectively,
regardless of the DID/SDID value.
• It is not possible to set the same line with menu items M3B0, M3B1, and M3B2.
If the same line is specified, priority is given in the order of M3B0, M3B1, and
M3B2 (for example, if the same line is specified with M3B0 and M3B1, the
setting with M3B1 is ignored).
• When VANC data is output to HDSDI playback signals, the number of the
output VANC line is the same as that of the input VANC line.
• When a UMID or essence mark line is selected with M3B1 or M3B2, UMID or
essence mark output takes priority. To disable UMID or essence mark output,
set setup menu item 651 or 657 to “off”.
Sub-item
1
LINE
Selects the lines for the VANC to be received.
OFF, 9LINE to 20LINE (59.94i/50i/29.97P/25P mode)
OFF, 9LINE to 25LINE (59.94P/50P mode)
2
DID
Specification of the DID of the VANC to receive
00h-FFh
3
SDID
Specification of the SDID of the VANC to receive
00h-FFh
M3B1: LINE1 SEL
Selects the lines to be received for the HDSDI VANC data.
OFF, 9LINE to 20LINE (59.94i/50i/29.97P/25P mode)
OFF, 9LINE to 25LINE (59.94P/50P mode)
M3B2: LINE2 SEL
Selects the lines to be received for the HDSDI VANC data.
OFF, 9LINE to 20LINE (59.94i/50i/29.97P/25P mode)
OFF, 9LINE to 25LINE (59.94P/50P mode)
M3C: POWER SAVE CONTROL
Specification of whether to enable the power saving function
OFF, ON
M3D: DATE/TIME PRESET
Specification of the date and time
M3E: USB MEMORY UTIL
For installation of software upgrade
For details, refer to the Maintenance Manual.
M3F: FACTORY SETUP
For details, refer to the Maintenance Manual.
M3: OTHERS: Other setting items
Item
Setting