Sony XDCAM HD PDW-HD1500 - Manual (Page 76)

76
Scene Selection (Clip List Editing)
Chapt
er 5 Ope
rati
ons
in GUI
S
c
reens
7
Save the clip list (see page 77).
To adjust the In and Out points of sub clips
(trim)
Proceed as follows to define the range of a scene by
changing the positions of the In and Out points.
See page 63 for more information about thumbnail screen
operations.
1
In the clip list thumbnail screen, select a thumbnail.
2
Display the Thumbnail Menu.
3
Select Trim Sub Clip, and then press the PUSH
SET(S.SEL) knob.
The Clip List (Trim) screen appears.
Like the clip playback screen, this screen allows you to
play and search all clips on the disc.
To display a list of In and Out point operations that
you can perform
Press the MENU button.
4
When you find the point that you want to make the
start point, select “IN” and then press the PUSH
SET(S.SEL) knob.
The timecode of the new In point appears in the
timecode display, and the Total (total duration) and
DUR (clip duration) displays are updated.
5
When you find the point that you want to make the end
point, select “OUT” and then press the PUSH
SET(S.SEL) knob.
The timecode of the new Out point appears in the
timecode display, and the Total (total duration) and
DUR (clip duration) displays are updated.
To cue up the In point or Out point
Display the Thumbnail Menu, select Cue up Inpoint or
Cue up Outpoint, and then press the PUSH
SET(S.SEL) knob.
To cancel the In point or Out point setting
Display the Thumbnail Menu, select Reset Inpoint or
Reset Outpoint, and then press the PUSH SET(S.SEL)
knob.
The In point or Out point setting returns to the previous
value.
6
Select OK, and then press the PUSH SET(S.SEL)
knob.
7
Repeat steps 1 to 6 as required.
8
Save the clip list (see page 77).
To delete sub clips
See page 63 for more information about thumbnail screen
operations.
1
Select the clips to delete in the clip list thumbnail
screen (multiple selections possible).
2
Display the Thumbnail Menu.
3
Select Delete Sub Clips, and then press the PUSH
SET(S.SEL) knob.
A message appears asking you to confirm the deletion.
4
Select OK, and then press the PUSH SET(S.SEL)
knob.
5
Repeat steps 1 to 4 as required.
6
Save the clip list (see page 77).
To play the clip list
See page 63 for more information about GUI screen
operations.
To play using GUI screens
1
In the clip list thumbnail screen, select the thumbnail
of the sub clip where you want to start play.
To start play from the start of the clip list
Select the thumbnail of the first sub clip.
2
Press the PUSH SET(S.SEL) knob.
To play using the clip list playback screen
1
Display the clip list playback screen.
Clip List (Trim) 001/034
TCR CLIP
01:17:33:08 019/035
01:17:33:08
Total
IN
00:13:48:24
DUR 00:00:21:27
OK
Cancel
01:17:55:05
OUT