SMC Networks TIGERSWITCH 10/100 - Manual (Page 111)

P
ORT
T
RUNK
C
ONFIGURATION
2-79
Command Attributes
• WRR – Weighted Round-Robin shares bandwidth at the egress
ports by using scheduling weights of 1, 3, 12 and 48 for queue
0, 1, 2 and 3 respectively.
• Strict – Services the egress queues in sequential order,
transmitting all traffic in the higher priority queues before
servicing lower priority queues.
Web – Click Priority, Queue Mode. Select the required queue
mode, click Apply.
CLI – This example set the queue mode to use the strict service
rule.
Port Trunk Configuration
You can create multiple links between devices that work as one
virtual, aggregate link. A port trunk offers a dramatic increase in
bandwidth for network segments where bottlenecks exist, as well
as providing a fault-tolerant link between two devices. You can
create up to four trunks at a time, with any single trunk containing
up to eight ports.
Console(config)#queue mode strict 3-147
Console(config)#