SMC Networks TIGERSWITCH 10/100 - Manual (Page 62)

C
ONFIGURING THE
S
WITCH
2-30
Port Configuration
Displaying Connection Status
You can use the Port Information or Trunk Information pages to
display the current connection status, including link state, speed/
duplex mode, flow control, and auto-negotiation.
Command Attributes
• Name – Interface label.
• Type – Indicates the port type (100BASE-TX, 1000BASE-T,
1000BASE-SX, 1000BASE-LX or 100BASE-FX).
• Admin Status – Shows if the interface is enabled or disabled.
- Web - Displays Enabled or Disabled.
- CLI - Displays Port Admin (up or down).
• Link Status – Indicates if the link is Up or Down. (CLI only)
• Oper Status – Indicates if the link is Up or Down. (Web only)
• Port Operation Status – Provides detailed information on port
state.
- CLI only; displays this item only if the link is up.
• Speed/Duplex Status – Shows the current speed and duplex
mode.
• Flow Control Status – Indicates the type of flow control
currently in use.
- Web - IEEE 802.3x, Back-Pressure or None.
- CLI - Enabled or Disabled. Flow Type shows IEEE 802.3x,
Back-Pressure or None.
• Autonegotiation – Shows if auto-negotiation is enabled or
disabled.