SMC Networks TIGERSWITCH 10/100 - Manual (Page 56)

C
ONFIGURING THE
S
WITCH
2-24
If you download the startup configuration file under a new file
name, you can set this file as the startup file at a later time, and
then restart the switch.
Resetting the System
Web – Click System, Reset. Click the Reset button to restart the
switch.
CLI – Use the reload command to restart the switch.
Note: When restarting the system, it will always run the
Power-On Self-Test.
Displaying Bridge Extension Capabilities
The Bridge MIB includes extensions for managed devices that
support Multicast Filtering, Traffic Classes, and Virtual LANs. You
can access these extensions to display default settings for the key
variables, or to configure the global setting for GARP VLAN
Registration Protocol (GVRP).
Console#config
Console(config)#boot system config: startup-new
3-25
Console(config)#exit
Console#reload
3-17
Console#reload 3-17
System will be restarted, continue <y/n>?