SMC Networks TIGERSWITCH 10/100 - Manual (Page 118)

C
ONFIGURING THE
S
WITCH
2-86
Web – Click SNMP, SNMP Configuration. Fill in the IP address and
community string for each Trap Manager that will receive these
messages, mark Enable Authentication Traps if required, and then
click Add.
CLI – This example adds a trap manager and enables
authentication traps.
Multicast Configuration
Multicasting is used to support real-time applications such as video
conferencing or streaming audio. A multicast server does not have
to establish a separate connection with each client. It merely
broadcasts its service to the network, and any hosts that want to
receive the multicast register with their local multicast switch/
router. Although this approach reduces the network overhead
required by a multicast server, the broadcast traffic must be
carefully pruned at every multicast switch/router it passes through
to ensure that traffic is only passed on the hosts which subscribed
to this service.
Console(config)#snmp-server host 10.1.19.23 batman version 1 3-57
Console(config)#snmp-server enable traps authentication 3-58