SMC Networks TIGERSWITCH 10/100 - Manual (Page 178)

C
OMMAND
L
INE
I
NTERFACE
3-36
show system
Use this command to display system information.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
• For a description of the items shown by this command, refer to
“Displaying System Information” on page -9.
• The POST results should all display “PASS.” If any POST test
indicates “FAIL,” contact your distributor for assistance.
Example
Console#show system
System description: TigerSwitch 10/100 - 6724L2 Managed 24+2
Standalone Switch
System OID string: 1.3.6.1.4.1.259.6.10.42
System information
System Up time: 0 days, 3 hours, 53 minutes, and 31.79 seconds
System Name
: [NONE]
System Location : [NONE]
System Contact : [NONE]
MAC address : 00-55-FF-FF-DD-DD
Web server : enable
Web server port : 80
POST result
--- Performing Power-On Self Tests (POST) ---
UART Loopback Test......................PASS
Flash Memory Checksum Test..............PASS
CPU Self Test...........................PASS
MPC850 clock Timer and Interrupt TEST...PASS
WatchDog Timer and Interrupt Test.......PASS
DRAM Test...............................PASS
ACD Chip Test...........................PASS
Switch Driver Initialization............PASS
Switch Internal Loopback Test ..........PASS
------------------- DONE --------------------
Console#