SMC Networks TIGERSWITCH 10/100 - Manual (Page 182)

C
OMMAND
L
INE
I
NTERFACE
3-40
Command Usage
• RADIUS uses UDP which only offers best-effort delivery. Also,
note that RADIUS encrypts only the password in the
access-request packet from the client to the server.
• RADIUS logon authentication assigns a specific privilege level
for each user name and password pair. The user name,
password, and privilege level must be configured on the
authentication server.
• You can specify two authentication methods in a single
command to indicate the authentication sequence. For
example, if you enter “authentication login radius local,”
the user name and password on the RADIUS server is verified
first. If the RADIUS server is not available, then the local user
name and password is checked.
Example
Related Commands
username - for setting the local user names and passwords
(3-27)
radius-server host
Use this command to specify the RADIUS server. Use the no form
to restore the default.
Syntax
radius-server host host_ip_address
no radius-server host
host_ip_address - IP address of server.
Default Setting
10.1.0.1
Console(config)#authentication login radius
Console(config)#