Connectors for modbus rs485 networks – Schneider Electric Processor Adapter User Manual
Page 132
Advertising
Using the Modbus Ports
132
870 USE 101 10 V.2
Connectors for Modbus RS485 Networks
Overview
This section describes the connectors which should be used in constructing an
RS485 network for Momentum components.
RJ45 Connector
“T”
This connector is used with the RS485 port on the 172 JNN 210 32 Option Adapter.
DB9 Connector
“T”
This connector is used with the RS485 port on the Processor Adapters.
Continued on next page
Description
Part Number
Illustration
Modbus RS485 Connector “T”
(RJ45 base)
170 XTS 041 00
Description
Part Number
Illustration
Modbus RS485 Connector “T”
(DB9 base)
170 XTS 040 00
Advertising