Schneider Electric Processor Adapter - Manual (Page 389)

Configuring a Modbus Plus Network in Concept with Peer Cop
870 USE 101 10 V.2 389
Specifying References for Input and Output Data
Overview We will now set up the 171 CCS 760 00 Momentum M1 CPU at Modbus Plus
address 2 to:
l send eight 4 x registers of specific output to the supervisory computer at
Modbus Plus address 1.
l
receive five 4 x registers of global input data from the ATRIUM supervisor.
These registers are the first five registers in a 10-register block of global
outputs broadcast by the supervisory controller.
Defining the
Specific Output The following table describes how to define the specific output, starting from the
Peer Cop dialog box.
Continued on next page
Note: For this example, we will use the default values for Health Timeout (500
ms) and Last Value (Clear on timeout).
Step Action
1 Click on the Specific Output... button.
Result: The Specific Output dialog box appears.