Schneider Electric Processor Adapter - Manual (Page 91)

Assembling Momentum Components
870 USE 101 10 V.2 91
Assembling a Processor Adapter and I/O Base, Continued
Procedure:
Assembling a
Processor
Adapter and an
I/O Base,
Continued
Next Step Once the Processor Adapter has been assembled, it can be mounted on a DIN rail
or surface mounted inside a panel enclosure. A Momentum M1 CPU assembly is
classified as open equipment. Open equipment should be installed in an industry-
standard enclosure, and direct access must be restricted to qualified service
personnel.
For a detailed description of installation procedures and grounding considerations,
refer to the
Momentum I/O Bases User Manual (870 USE 002 00).
Step Action
4 Push the Processor Adapter onto the base, gently pressing the locking tabs
inward.
Result: The locking tabs on each side of the Processor Adapter slide inside the
I/O base and out through the locking slot. The 12-pin connectors on the two units
are mated to each other in the process.