Schneider Electric Processor Adapter User Manual
Page 269
Advertising
Using Peer Cop with Modsoft
870 USE 101 10 V.2
269
Confirming the Peer Cop Summary Information, Continued
Procedure
Follow the steps in the table below to change the Peer Cop summary information.
Continued on next page
Step
Action
1
Push <Tab> to move the cursor to the menu bar at the top of the Peer Cop screen.
2
Move the cursor onto the Timeout command. Push <Enter>.
Result: The cursor moves into the Timeout field in the Peer Cop summary
information region, and the default value, 500, is cleared.
3
Type the number 240, then push <Enter>.
Advertising