Schneider Electric Processor Adapter User Manual
Page 90
Assembling Momentum Components
90
870 USE 101 10 V.2
Assembling a Processor Adapter and I/O Base, Continued
Procedure:
Assembling a
Processor
Adapter and an
I/O Base
Follow the steps in the table below to assemble a Processor Adapter and an I/O
base.
Continued on next page
Step
Action
1
Choose a clean environment to assemble the I/O base and adapter to protect the
circuitry from contamination.
2
Be sure that the I/O base is not under power when you assemble the module.
3
Align the two plastic snap extensions on the Processor Adapter with the slots on
the sides of the I/O base. The 12-pin connectors will automatically line up when
the units are in this position. The two devices should be oriented so their
communication ports are facing out, on the back side of the assembly.