Schneider Electric Processor Adapter - Manual (Page 242)

Configuring an M1 CPU with Modsoft
242 870 USE 101 10 V.2
Section 8.4
I/O Mapping the Local I/O Points
Accessing and Editing the I/O Map
Introduction Every M1 Processor Adapter is assembled on an I/O base. The I/O points on the
base are the local I/O for that processor.
As part of the configuration process, you need to create an I/O Map for the local
I/O. The I/O Map assigns the appropriate range and type of (0
x, 1x, 3x, or 4x)
reference values from the CPU’s state RAM to the input and/or output points on the
local base unit.
Accessing an I/O
Map Screen To access an I/O Map screen from the Configuration Overview screen, move the
cursor onto the I/O Map command on the top menu and push <Enter>.
Result: An I/O Map screen appears with the cursor placed in the Module field. The
label in the top left corner of the screen identifies it as Type: MOMENTUM I/O.
Continued on next page