Schneider Electric Processor Adapter - Manual (Page 177)

Using the I/OBus Port
870 USE 101 10 V.2 177
Cable Accessories
Overview Modicon provides several cabling solutions for I/OBus:
l Low profile cables in two lengths
l A 1m cable with high profile rear shell
l
A connector kit for building custom-length Interbus cables
This section describes those solutions.
Low Profile
Cables For side-by-side mounting of the CPU with Interbus I/O modules on a DIN rail or
wall, Modicon provides two specially molded low profile cables.
These cables have a male 9-in D-shell connector on one end and a female 9-pin D-
shell on the other. The male connector plugs into the female I/OBus port on the
Processor Adapter, and the female connector plugs into the male connector on the
left side of a 170 INT 110 00 Interbus Communications Adapter on an I/O base.
Additional cables can then be used to connect a series of I/O modules via their
Interbus communication ports.
Continued on next page
Part Number Length
170 MCI 007 00 11.4 cm (4.5 in)
170 MCI 100 01 100 cm (39 in)