Kodak 2400DSV - Manual (Page 103)

6 Function Mode and Adjustment
96
6.7.6 o6: Adjustment of the Top and Bottom Frame Black Band
Width
1. Load the Film in the machine and make a print.
<Conditions of printing/scanning>
Size: Letter (A4) Lengthwise
Centering:OFF
Auto Masking:ON
2. Check the width of the black band
running around the image area.
3. Refer to the charts given below.
Then, adjust to desired black band
width by Function Mode o6.
o6
Setting Adjusted black band width (mm)
d5 -6±3 band width decreases
d6 -4±3
d7 -2±3
d8 0±3
d9 2±3
dA 4±3
db 6±3 band width increases
Feed Direction
A Top and
Bottom
Frame
Image