Kodak 2400DSV - Manual (Page 79)

5 Disassembly and Cleaning
72
5.4.9 Removal of the P.W.Boards.
1 Remove the Left Cover,Lower Left Cover and Rear Cover.
(Refer to "Removal of Outer Cover".)
2 Open the Right Cover.
Only 220-240V area:
Remove the metal plates in the
Left and Right Cover also.
3 Remove the CCD Assy Lower
Cover. (2 screws)
4 Remove the front and rear Shield
Plate. (loosen the four screws)
5 Unplug all connectors on the
P.W.Board.
6 Remove the screws and then
remove the each P.W.Board.
-PWB-BB (5 screws)
-PWB-T (4 screws)
-PWB-EE (6 screws)
PWB-EE
PWB-BB
PWB-T