Kodak 2400DSV - Manual (Page 90)

Function Mode and Adjustment 6
83
6.4 Operation of the Function Mode
6.4.1 Entering the Function Mode
1. Press the Exposure Mode
Select Key, Multi-Print Key and
Clear/Stop Key on the control
panel at the same time for two
seconds or more.
The Multi-Print Display will show
"S".
2. Press the Multi-Print Key to
select the function mode.
Each depression of this key
changes the mode into the
following.
S →y→o→F→b→S→y....
S: Setting Function 1
y: Setting Function 2
o: Setting Function 3
F: Machine Operation Check Function 1
b: Machine Operation Check Function 2
*c4: for factory use (do not entry)
3. Press the Exposure Adjustment
Key to select the function number.
6.4.2 Execution method in F and b mode (except F4, F8 and b6)
1. To perform the function, press the
Start key.
select
select
S1
→S2→...→S1→
y1 →y2→...→y1→
o1 →o2→...→o1→
F1
→F2→...→F1→
b1 →b2→...→b1→