Kodak 2400DSV - Manual (Page 109)

6 Function Mode and Adjustment
102
6.9 b mode Operations
6.9.1 b1: Checking the Scan Table Unit Function
This mode should be used to check the Scan Table Unit Function.
1. Referring to the setting procedure for Function mode, set "b1".
2. Press the Start Key to move the Scan Table Unit to the Scan position.
3. Press the Start Key to move the Unit to the Reader position.
6.9.2 b2: Scanning mirror operation check
This mode should be used to check the Scan Mirror and the Scan Motor.
1. Referring to the setting procedure for Function mode, set "b2".
2. Press the Start key, to perform scan operation (Scan and Prescan).
6.9.3 b3: For Factory use
For factory adjustment. Do not use in field.
Reader Position
Scan Position
Scan
Prescan