Kodak 2400DSV - Manual (Page 9)

1 Safety Precautions for Inspection and Service
2
2. Before starting the procedures, be sure to unplug the power cord.
3. Use the specified parts.
4. Handle the power cord with care and never use a multiple socket.
5. Be careful about the high-voltage parts.
6. Do not keep your hands wet when performing the procedures.
• This product contains a high-voltage unit and a circuit with a
large current capacity that may cause an electric shock or
burn.
• The product also contains parts that can jerk suddenly and
cause injure.
• If this product uses a laser, laser beam leakage may cause
eye damage or blindness.
• For replacement parts, always use the genuine parts
specified in the manufacturer’s Parts Manual. Installing a
wrong or unauthorized part could cause dielectric
breakdown, overload, or undermine safety devices resulting
in possible electric shock or fire.
• Replace a blown electrical fuse or thermal fuse with its
corresponding genuine part specified in the manufacturer’s
Parts Manual. Installing a fuse of a different make or rating
could lead to a possible fire. If a thermal fuse blows
frequently, the temperature control system is probably of a
problem and action must be taken to eliminate the cause of
the problem.
• Do not brake, crush or otherwise damage the power cord.
Placing a heavy object on the power cord, or pulling or
bending it may damage it, resulting in a possible fire or
electric shock.
• Do not use a multiple outlet to which any other appliances
or machines is connected.
• Be sure the power outlet meets or exceeds the specified
capacity.
• A part marked with the symbol shown on the left carries a
high voltage.
Touching it could result in an electric shock or burn. Be sure
to unplug the power cord before servicing this part or the
parts near it.
• Do not unplug or plug in the power cord, or perform any
kind of service or inspection with wet hands. Doing so could
result in an electric shock.