Kodak 2400DSV - Manual (Page 92)

Function Mode and Adjustment 6
85
6.5 S mode Operations
6.5.1 S1: Auto Reset
Setting changes made to the control panel that are not used within 60
seconds of being input are automatically cancelled and the system reverts
back to the original settings.
6.5.2 S2: Auto Power Save
Turns the Printer's fuser OFF if the system is left idle for a specific period
of time.
* 200V units operate on a default 30 minute Auto Power Save setting.
6.5.3 S3: Auto Projection Lamp OFF
Turns the Scanner's Projection Lamp OFF if the system is left idle for a
specified period of time.
6.5.4 S4: Coin Vender / Foot Switch Setting
When you equip this system with the coin vender (option) or Foot Switch
(option), select the d1(d2) or d3.
*d1 and d2 are the same functions.
Display setting Function
S1 *d0
d1 Enable (60 seconds)
Disable
Display setting Function
S2 *d0
d1
d2 Disable
Enable (30 minute after)
Enable (60 minute after)
Display setting Function
S3 *d0
d1
d2 Disable
Enable (30 minute after)
Enable (60 minute after)
Display setting Function
S4 *d0
d1
d2
d3 Disable
Enable (Coin Vender)
Enable (Coin Vender)
Enable (Foot Switch)