Kodak 2400DSV - Manual (Page 119)

7 Troubleshooting
112
7.4.7 CL: Printer Clock malfunction
Check Item Remedy
Is CL shown even when power is
turned OFF, then turned ON again? →No OK
↓Yes
Is the dedicated interface cable used? →No Replace the Interface Cable.
↓Yes
Checks the connection of an interface
cable. →No Reconnect the Interface Cable.
↓Yes
Confirm the frequency of the Oscillator
on PWB-EE.
When using the MSP3000 Printer
OSC1: 42.3158MHz
OSC2: 95.2106MHz
When using the MSP2000 Printer.
OSC1: 19.5332MHz
OSC2: None
→NG Reinstall the Oscillator.
or
Replace the Oscillator.
↓OK
Replace PWB-EE.