KORG Professional Engineer PA3 - Manual (Page 108)

106 Effects
Dynamic Modulation sources
Pa3X is equipped with four powerful Effect Processors for the
internal MIDI tracks (Upper, Lower, Style, Song, Pads).
Dynamic Modulation sources
When the symbol is encoutered, a Dynamic Modulation
can be applied to the corresponding parameter. Dynamic Modu-
lation allows for realtime control of the effect. The following
table shows the available modulation sources.
Some notes on the Gate parameters follow.
Gate1, Gate1+Dmpr (Gate1+Damper)
The effect is at maximum during note-on, and will stop when all
keys are released. With Gate1 + Dmpr, the effect will remain at
maximum even after the keys are released, as long as the damper
(sustain) pedal is pressed.
Gate2, Gate2+Dmpr (Gate2+Damper)
This is essentially the same as for Gate 1 or Gate 1 + Dmpr. How-
ever when Gate 2 or Gate 2 + Dmpr are used as a dynamic mod-
ulation source for the EG, a trigger will occur at each note-on.
(In the case of Gate 1 and Gate 1 + Dmpr, the trigger occurs only
for the first note-on.)
Effects
Modulation source Note
Off No modulation
Gate1
Gate1+Dmpr
Gate2
Gate2+Dmpr
Note Nr Note Number
Velocity Note Velocity
Expo Velocity Exponential Note Velocity
AfterTouch After Touch
JS X Joystick Left/Right
JS+Y: CC#01 Joystick Forward
JS-Y: CC#02 Joystick Backward
MIDI(CC#04)
MIDI(CC#12)
MIDI(CC#13)
Ribb.(CC#16) Ribbon Controller
MIDI(CC#18)
MIDI(CC#17)
MIDI(CC#19)
MIDI(CC#20)
MIDI(CC#21)
MIDI(CC#17+)
MIDI(CC#19+)
MIDI(CC#20+)
MIDI(CC#21+)
Damper: #64
Prta.SW: #65 Portamento Switch
Sostenu: #66 Sostenuto Pedal
MIDI(CC#67)
MIDI(CC#80)
MIDI(CC#81)
MIDI(CC#82)
MIDI(CC#83)
MIDI(CC#85)
MIDI(CC#86)
MIDI(CC#87)
MIDI(CC#88)
Tempo
Modulation source Note
Gate1,Gate1+Dmpr
Gate1
Note
Dmpr
1 2 3 1 2 3
Damper Pedal
Gate1+Dmpr
Time
On
Off
Gate2,Gate2+Dmpr
Gate2
Note
Dmpr
1 2 3 1 2 3
Damper Pedal
Gate2+Dmpr
Time
On
Off