KORG Professional Engineer PA3 - Manual (Page 47)

45 Pad Record mode
Pad Chord Table
Advanced
RX Noise
Use these controls to adjust the volume of RX Noises in the cor-
responding tracks. This control applies to all types of tracks
(provided the Sound includes RX Noises).
Humanize GTR
Use these controls to apply a random value to the position,
velocity and length of notes of Guitar tracks (see “Track Type”
on page 44). This control has no effect on other types of track.
Wrap Around
The wrap-around point is the highest register limit for the Pad
track. The Pad pattern will be transposed according to the
detected chord. If the chord is too high, the Pad track might play
in a register that is too high, and therefore unnatural. If, how-
ever, it reaches the wrap-around point, it will be automatically
transposed an octave lower.
The wrap-around point can be individually set in semitone steps
up to a maximum of 12 semitones, relative to the chord root set
in the main page of the Pad Record mode (see “Key/Chord” on
page 37).
1…12 Maximum transposition (in semitones) of the
track, referred to the original key of the Pad pat-
tern.
Pad Chord Table
This is the page where you can assign a Chord Variation to each
of the most important recognized chord. When a chord is recog-
nized, the assigned Chord Variation will be automatically
selected by the arranger to play the Pad track.
Chord / Chord Variation
Use these parameters to assign a Chord Variation to each of the
most important chords.
Import: Import Groove
The Import Groove function allows the loading of MIDI
Grooves (“.GRV” files) generated by the Slice function (see
“Time Slice” in the Sampling mode). By importing these data to
the Pad track, and assigning the Sound based on the sliced sam-
ples to the same track, you can play the original audio groove,
and freely change its tempo.
From
Use this parameter to select one of the MIDI Groove patterns
(“.GRV” files) generated when saving data after a Time Slice
operation.
To CV (Chord Variation)
Use this parameter to select the target Chord Variation.
Import: Import SMF
The Import SMF function allows you to import MIDI data from
a Standard MIDI File (SMF) created on your preferred external
sequencer, and transform them in a Chord Variation.
When programming a Chord Variation on the external
sequencer, please assign the Pad track to the MIDI channel #10.
Note: Only SMF in format 0 can be loaded.
From Song
This is the name of the Standard MIDI File to be loaded. Touch
the Select button to open the file selector, and select an “.SMF”
file.
Select
Touch this button to open the file selector and load the SMF.
PAD
PAD
PAD
PAD