Lanier CW2200SP - Manual (Page 123)

CPT029
7. Close the front cover.
CPT030
8. Follow the on-screen instructions to specify the paper type and thickness of the paper.
Press [Matches] if the paper type and thickness of paper you loaded are the same as those
displayed on the screen.
If the paper type and thickness are different from those displayed, press [Does not Match]. Select
the proper items according to the paper type and thickness you want to use, and then press [OK].
9. Make sure that [ ] appears at the paper bypass location on the screen.
• Do not operate the machine while "Please wait." is displayed when the machine is turned on.
• Press the rewind button to rewind the roll of paper. Rewinding it manually may cause paper jams.
• When [Film (Matted)] is specified for Paper Type or when Prevent Paper Abrasion is specified,
press [Exit] on the screen after closing the front cover. You can change the Prevent Paper Abrasion
setting in System Settings if necessary. However, if you specify [Film (Matted)] for Paper Type, the
Prevent Paper Abrasion setting is automatically selected, and you cannot change it. For details
about Prevent Paper Abrasion, see "System Settings", Connecting the Machine/ System Settings
.
• Do not print on both sides of the paper.
• Do not use paper already printed on.
• Do not insert multiple sheets at one time. Doing so can result in jams and poor quality prints.
Loading Paper into the Paper Bypass Location
121