Lanier CW2200SP User Manual
Page 161
Problem
Causes
Solutions
Misfeeds occur frequently.
Jammed or torn paper is
inside the machine.
Remove the paper as necessary. For
details about removing jammed paper,
see "Removing Jammed Paper",
Troubleshooting .
Misfeeds occur frequently.
You may have loaded paper
of a size different from the
paper size settings.
• Remove misfed paper. For details
about removing jammed paper,
see "Removing Jammed Paper",
Troubleshooting .
• Select a proper paper size. For
details about how to change the
paper size, see "Changing the
Paper Size", Paper Specifications
and Adding Paper .
"Turn main Power Switch off"
appears.
The machine does not shut
down normally when the
main power switch is turned
off, and then immediately
turned on.
Turn off the main power switch. Wait
for 10 seconds or more after the main
power indicator goes out, and then
turn it on again.
"Shutting down... Please
wait. Main power will be
turned off automatically.
Maximum waiting time: 2
minute(s)" appears.
The shut down procedure
has begun because the main
power switch was turned off
while the machine was in
standby mode or performing
an operation.
Follow the message that appears and
wait until the machine has shut down.
Do not turn on the main power switch
while this message is displayed. If the
main power switch has been turned on,
follow the message that appears. For
details about turning the main power
switch on and off, see "Turning On/Off
the Power", Getting Started .
The machine makes a loud
clicking sound shortly after
the main power switch is
turned off.
The main power switch
makes a loud clicking sound
inside the machine when the
main power is turned off
automatically.
You will hear a loud clicking sound
inside the machine when it shuts down.
This is not a malfunction.
An error has occurred when
the Address Book is
changed from the display
panel or Web Image
Monitor.
The Address Book cannot be
changed while deleting the
multiple stored documents.
Wait a while, and then retry the
operation.
When You Have Problems Operating the Machine
159